- With internal polyester reinforcement:
Resistant to the drum pressure at the inflections and on the return side.
- Recommended for particulary long and wide conveyors or for conveyors with inflections.
PVC "Runer"
FRRS type
Layout of transverse cleat and "Runer" without base.
*When a cleat is type NL.070 or NL 080, the minimum distance of 2 mm will be increased to 5 mm.
| PVC | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| FRRS35 | 35 | 48 | 55 | 80 | 5 |
| FRRS40 | 40 | 48 | 55 | 100 | 5 |
| FRRS45 | 45 | 48 | 55 | 100 | 5 |
| FRRS50 | 50 | 48 | 55 | 120 | 5 |
| FRRS55 | 55 | 48 | 55 | 120 | 5 |
| FRRS60 | 60 | 48 | 55 | 140 | 5 |
| FRRS65 | 65 | 48 | 55 | 140 | 5 |
| FRRS70 | 70 | 48 | 55 | 160 | 5 |
| FRRS75 | 75 | 48 | 55 | 160 | 5 |
| FRRS80 | 80 | 48 | 55 | 180 | 5 |
| FRRS85 | 85 | 48 | 55 | 180 | 5 |
| FRRS90 | 90 | 48 | 55 | 200 | 5 |
| FRRD95 | 95 | 48 | 55 | 220 | 5 |
| FRRS100 | 100 | 48 | 55 | 220 | 5 |
FSSS type
- With internal polyester reinforcement.
- Recommended for straight or lighter conveyors.
The distance between the transverse cleats should be a multiple of the - cF - pitch, if it is to coincide with the undulation
of the "Runer".
The minimum length for endless belts with the Runer profile is:
- 2,000 mm with PVC Runer
- 2,500 mm with PU Runer
| PVC | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| FSSS35 | 35 | 30 | 30 | 80 | 3.5 |
| FSSS40 | 40 | 30 | 30 | 90 | 3.5 |
| FSSS45 | 45 | 30 | 30 | 90 | 3.5 |
| FSSS50 | 50 | 30 | 30 | 100 | 3.5 |
| FSSS55 | 55 | 30 | 30 | 100 | 3.5 |
| FSSS60 | 60 | 30 | 30 | 110 | 3.5 |
| FSSS65 | 65 | 30 | 30 | 120 | 3.5 |
FNSS type
- No internal reinforcement:
Developed for use in conveyors with extremely small pulley diameters.
- Recommended for small straight conveyors (no inflections)
The minimum distance between 2 Runer should be:
-100 mm with PVC Runers
-120 mm with PU Runers
| PVC | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| FNSS35 | 35 | 35 | 30 | 40 | 4 |
| FNSS45 | 45 | 35 | 30 | 50 | 4 |
| FNSS55 | 55 | 35 | 30 | 60 | 4 |
PU "Runer" - without base
*When the cleat and Runer are PU the minimum distance between them will be 4 mm.
Profile welded directly onto the belt, without internal reinforcement.
The length of the transverse cleats should be a multiple of 25 mm
*When the cleat and Runer are PU the minimum distance between them will be 4 mm.
| PU | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| UNSS35 | 35 | 28 | 30 | 50 | 2.3 |
| UNSS40 | 40 | 28 | 30 | 60 | 2.3 |
| UNSS45 | 45 | 28 | 30 | 65 | 2.3 |
| UNSS50 | 50 | 28 | 30 | 75 | 2.3 |
| UNSS55 | 55 | 28 | 30 | 80 | 2.3 |
| UNSS60 | 60 | 28 | 30 | 90 | 2.3 |
| UNSS65 | 65 | 28 | 30 | 95 | 2.3 |
"Runer" - with base
Profile with base for welding by hand with the Leister or using our LSM 1200R machine.
PVC - FSRC type
| PVC | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| FSRC35 | 35 | 55 | 55 | 80 | 3.5 |
| FSRC55 | 55 | 55 | 55 | 120 | 3.5 |
| FSRC85 | 85 | 55 | 55 | 180 | 3.5 |
Comments: Wave width = 45 mm
Thickness base = 3.5 mm
PU - UNSM type
| PU | hF mm height | aF mm width | cF mm pitch | Minimum diameter mm | Thickness mm |
|---|---|---|---|---|---|
| UNSM35 | 35 | 44 | 30 | 70 | 2.3 |
| UNSM55 | 55 | 48 | 30 | 100 | 2.3 |
Comments: Wave width = 28 mm
Thickness base = 3.3 mm
All these profiles are available in two different qualities:
- White:
Non-toxic, FDA, suitable for using with foodstuffs.
- Green:
Suitable for all uses that do not require food quality belts, except green PU, which is FDA
